What Is Spunlace Non Woven Fabric for Wet Wipes?

What Is Spunlace Non Woven Fabric?

Spunlace non woven fabric is made by using high-pressure water jets to entangle fibers together. No glue is used. The fibers are locked together physically.

Because of this structure, spunlace fabric feels closer to textile than most other nonwoven materials. It is soft, flexible, strong.

Spunlace Non Woven Fabric For wet wipes, this matters a lot. The fabric must stay strong when wet, but still feel gentle on skin.

Why Spunlace Is Commonly Used for Wet Wipes

In wet wipe production, the fabric is constantly exposed to water or lotion. Some nonwoven fabrics lose strength when wet. Spunlace performs better in this situation.

Factories usually choose spunlace non woven fabric for wet wipes because:

  • It remains strong after absorbing liquid

  • It does not easily tear during pulling

  • The surface is smooth and skin-friendly

  • It works well with different lotion formulas

If you visit a wet wipe production line, most baby wipes, facial wipes, and cleaning wipes use spunlace as the base material.

Common Fiber Compositions for Wet Wipe Spunlace

The fiber blend affects softness, strength, and cost.

Polyester / Viscose Blend

This is the most common structure.

  • Viscose adds softness and absorbency

  • Polyester adds strength and stability

Typical ratios:

  • 70% viscose / 30% polyester

  • 50% viscose / 50% polyester

This blend gives a good balance between cost and performance.

100% Viscose

Used for higher-end wipes.

  • Very soft

  • High liquid absorption

  • Good skin contact performance

However, strength when wet must be carefully controlled.

Biodegradable Options

Some markets require more eco-friendly materials.

Blends may include:

  • Natural fibers

  • Wood pulp combinations

These are often used for flushable or sustainable wipes, depending on structure design.

Key Properties Required for Wet Wipes

When selecting spunlace non woven fabric for wet wipes, manufacturers usually check:

Wet Strength

The fabric must not break when pulled out of the package.

Absorbency

It must hold enough lotion without dripping.

Softness

For baby wipes or facial wipes, hand feel is very important.

Lint Control

Low lint helps avoid residue on skin.

Even Surface

Embossed or plain patterns can affect cleaning performance.

Plain vs Embossed Spunlace Non Wove Fabric for Wet Wipes

Type Surface Typical Use
Plain Smooth Baby wipes, facial wipes
Embossed Textured Cleaning wipes, kitchen wipes

Embossed surfaces can improve cleaning effect, especially for household wipes.

Spunlace Non Woven Fabric for Wet Wipes Weight (GSM) Selection

Common weight range:

  • 30–50 gsm for baby wipes

  • 40–60 gsm for cleaning wipes

  • Heavier options for industrial wipes

Higher gsm usually means stronger and thicker fabric, but it also increases cost. Most buyers test different weights before confirming.

Production Considerations

In wet wipe factories, spunlace fabric must run smoothly through:

  • Folding machines

  • Cutting units

  • Packaging systems

If the fabric edge frays too much, production speed may slow down. That’s why edge stability is important.

Also, compatibility with lotion formula should be tested. Some chemical ingredients may affect long-term strength.

How to Choose the Right Spunlace Non Woven Fabric for Wet Wipes

When discussing with suppliers, buyers usually confirm:

  • Fiber composition

  • GSM

  • Roll width

  • Embossing pattern

  • Biodegradability requirements

Sample testing with actual lotion formula is strongly recommended.

FAQ

Is spunlace better than spunbond for wet wipes?
Yes. Spunlace is softer and stronger when wet. Spunbond is usually too stiff for skin-contact wipes.

Can spunlace fabric be biodegradable?
It depends on fiber composition and structure. Some blends are designed for better environmental performance.

What is the typical roll width for wet wipe production?
Common widths vary depending on machine setup. Custom width is usually available.

Does higher gsm mean better quality?
Not always. It depends on application. Too heavy may increase cost without adding value.

Can spunlace be used for disinfectant wipes?
Yes, but chemical compatibility should be tested to ensure long-term stability.

Is embossing necessary?
Not always. For baby wipes, plain surface is often preferred.

Why Choose Us for Spunlace Non Woven Fabric

  • Stable spunlace production supply

  • Multiple fiber blend options

  • Custom gsm and width available

  • Experience supporting wet wipe manufacturers

  • Export-ready quality control

Contact Us

If you would like to learn more about our interlining products or need support in choosing the right solution for your garments, feel free to contact us. Shanghai Weboss New Material Technology Co.Ltd, Ltd is always happy to discuss your requirements and provide professional suggestions.
TEL: +86-21-33608891
FAX: +86-21-33608892
Email: info@webosstex.com

continue reading

Related Posts